VOC Compliant

Refer to coating manufacturer’s instructions before thinning. Always test a small amount of this product in the coating before use to verify compatibility. Stir thinner into coating gradually until a uniform consistency is achieved. For best results, thin coatings no more than 20%. To prep and clean surfaces, add thinner to a cotton cloth and wipe. Do not use to clean or flush spray equipment. Note: if a faster evaporation rate is desired, use Crown® VOC Compliant Lacquer Thinner. 

Please refer to your Spray Equipment’s user manual for cleaning directions. Do not soak spray gun parts in Pro Flush for extended periods of time. For cleaning surfaces, add Crown VOC Compliant Pro Flush to a cotton cloth and wipe. 

For cleaning surfaces, add Crown® VOC Compliant Pro Clean-Up to a cotton cloth and wipe. For cleaning brushes, place brush in metal can with  enough cleaner to cover bristles. Do not use a plastic container. Soak until paint is softened. Carefully scrub the brush against the inside of the metal container and work in fresh cleaner as needed. Rinse thoroughly with warm tap water (DO NOT USE HOT WATER) and add a mild soap if necessary to restore brush luster. Repeat cleaning steps if necessary. Dry brush with clean rags and store brush flat on its side in paper. For fresh paint, eliminate soaking step. For cleaning rollers with fresh paint, pour cleaner into clean roller tray, saturating roller. Remove excess cleaner by rolling on ribbed area of tray. Remove roller from frame, rinse thoroughly with tap water. Stand on end to dry. Soaking brushes for extended periods of time will damage the bristles.

Add Crown® VOC Compliant Lacquer Thinner to lacquer slowly with good agitation until desired viscosity is achieved. For best results, do not reduce more than 10%. Do not use to thin automotive lacquers. Refer to coating manufacturer’s instructions before thinning. Note: this product has a faster evaporation rate than standard Lacquer Thinner. Before use, always test in a small area to ensure coating and surface compatibility with product. If a slower evaporation rate is desired, try Crown® VOC Compliant Pro Thinner.

For cleaning brushes, place brush in metal can with enough cleaner to cover bristles. Do not use a plastic container. Soak until paint is softened. Carefully scrub the brush against the inside of the metal container and work in fresh cleaner as needed. Rinse thoroughly with warm tap water (DO NOT USE HOT WATER) and add a mild soap if necessary to restore brush luster. Repeat cleaning steps if necessary. Dry brush with clean rags and store brush flat on its side in paper. For fresh paint, eliminate soaking step. For cleaning rollers with fresh paint, pour cleaner into clean roller tray, saturating roller. Remove excess cleaner by rolling on ribbed area of tray. Remove roller from frame, rinse thoroughly with tap water. Stand on end to dry. Soaking brushes for extended periods of time will damage the bristles. 

For cleaning brushes, place brush in metal can with enough cleaner to cover bristles. Do not use a plastic container. Soak until paint is softened. Carefully scrub the brush against the inside of the metal container and work in fresh cleaner as needed. Rinse thoroughly with warm tap water (DO NOT USE HOT WATER) and add a mild soap if necessary to restore brush luster. Repeat cleaning steps if necessary. Dry brush with clean rags and store brush flat on its side in paper. For fresh paint, eliminate soaking step. For cleaning rollers with fresh paint, pour cleaner into clean roller tray, saturating roller. Remove excess cleaner by rolling on ribbed area of tray. Remove roller from frame, rinse thoroughly with tap water. Stand on end to dry. Soaking brushes for extended periods of time will damage the bristles.

For cleaning brushes, place brush in metal can with enough cleaner to cover bristles. Do not use a plastic container. Soak until paint is softened. Carefully scrub the brush against the inside of the metal container and work in fresh cleaner as needed. Rinse thoroughly with warm tap water (DO NOT USE HOT WATER) and add a mild soap if necessary to restore brush luster. Repeat cleaning steps if necessary. Dry brush with clean rags and store brush flat on its side in paper. For fresh paint, eliminate soaking step. For cleaning rollers with fresh paint, pour cleaner into clean roller tray, saturating roller. Remove excess cleaner by rolling on ribbed area of tray. Remove roller from frame, rinse thoroughly with tap water. Stand on end to dry. Soaking brushes for extended periods of time will damage the bristles.

To clean and prep surfaces, add Crown® VOC Compliant Extra Strength Paint Thinner Substitute to a cotton cloth and wipe. Refer to coating manufacturer’s instructions before thinning. Do not use more than recommended (no more than 15%). Always test a small amount of this product before use to verify compatibility. Stir thinner into coating gradually until a uniform consistency is achieved. Not recommended for use in spray equipment. Do not use to clean, flush or soak spray equipment. If a faster evaporation rate is desired, use Crown® VOC Compliant Lacquer Thinner. Can also be used for cleaning brushes. Note: This product has a faster evaporation rate and is stronger than traditional Paint Thinner.